Veröffentlichungen_FSM

Auszug aus der TU-Bibliografie

Struktur aus-/einblenden
Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Gruppiere nach: Publikationsjahr | Autor(en) | Typ des Eintrags
Springe zu: 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2000 | 1996
Anzahl der Einträge auf dieser Ebene: 321.

2019

Felger, Julian ; Stein, Nicolas ; Frey, Christopher ; Becker, Wilfried (2019):
Scaling laws for the adhesive composite butt joint strength derived by finite fracture mechanics.
In: Composite Structures, S. 546-556, 208, ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2018.09.100,
[Artikel]

Kirilova, E. ; Petrova, T. ; Becker, Wilfried ; Ivanova, J. (2019):
Modelling and parametric analysis of cohesive interface delamination of graphene monolayer nanocomposites.
In: IOP Conference Series: Materials Science and Engineering, In: 5th International Conference Recent Trends in Structural Materials, Pilsen, Czech Republic, 14–16 November 2018, 461, DOI: 10.1088/1757-899X/461/1/012029,
[Konferenzveröffentlichung]

Petrova, T. ; Kirilova, E. ; Becker, Wilfried ; Ivanova, J. (2019):
Modelling of interface stress transfer in graphene monolayer nanocomposites under static extension load.
In: IOP Conference Series: Materials Science and Engineering, In: 5th International Conference Recent Trends in Structural Materials, Pilsen, Czech Republic, 14–16 November 2018, 461, DOI: 10.1088/1757-899X/461/1/012067,
[Konferenzveröffentlichung]

Talmon l'Armée, Andreas (2019):
Analyse interlaminarer Rissentstehung in einschnittigen Überlappungsklebungen zwischen Laminatfügeteilen.
Darmstadt, Technische Universität, [Online-Edition: https://tuprints.ulb.tu-darmstadt.de/8692],
[Dissertation]

2018

Pfau, Bastian (2018):
Ein @verstellbares Zweiflächengleitlager zur Schwingungsminderung flexibler Rotoren.
Aachen, Shaker Verlag, TU Darmstadt, In: Berichte aus dem Maschinenbau, ISBN 978-3-8440-6207-6,
[Dissertation]

Stein, Nicolas (2018):
Analytische und semi-analytische Berechnungsmodelle zur Auslegung von Strukturklebverbindungen.
Darmstadt, Technische Universität, [Online-Edition: https://tuprints.ulb.tu-darmstadt.de/7649],
[Dissertation]

Altenbach, Holm ; Rosendahl, Philipp ; Becker, Wilfried ; Kolupaev, V. A. (2018):
Isogonal and isotoxal hexagons as extremal yield figures.
In: 41st Solid Mechanics Conference (SOLMECH 2018), 27.-31.8.2018,Warschau. Book of Abstracts, Hrsg.: K. Wisniewski, T. Burczynski, S. 36-37., [Konferenzveröffentlichung]

Bremm, Sophia ; Dölling, Sebastian ; Becker, Wilfried ; Blum, L. ; Peters, Ralph ; Malzbender, J. ; Stolten, D. (2018):
Numerical investigation of the thermomechanical behaviour of sealing joints within high-temperature SOFC stacks.
In: Proceedings of the 13th European SOFC and SOE Forum 2018, 3.-6. Juli 2018, Luzern. Beitrag A1404., [Konferenzveröffentlichung]

Drass, Michael ; Kolupaev, V. A. ; Rosendahl, Philipp ; Schneider, Jens ; Becker, Wilfried (2018):
Generalized cavitation criterion for poro-hyperelastic material.
In: J. Schneider, N. Kiziltoprak (Hrsg.): Baustatik-Baupraxis e. V. Forschungskolloquium., Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature 2018, In: Forschungskolloquium 2018 Grasellenbach, Grasellenbach, 13-14 April 2018, DOI: 10.1007/978-3-658-23627-4_6,
[Konferenzveröffentlichung]

Dölling, Sebastian ; Hell, Sascha ; Becker, Wilfried (2018):
Free-Edge Delamination in Composite Lamnates: Analysis and Prediction by Means of the Scaled Boundary Finite Element Method.
In: Proceedings of the 9th International Congress of Croatian Society of Mechanics, 18.-22. September 2018, Split, Kroatien., [Konferenzveröffentlichung]

Dölling, Sebastian ; Hell, Sascha ; Becker, Wilfried (2018):
An efficient semi-analytical finite fracture mechanics approach for the prediction of interlaminar crack initiation in composite laminates.
In: Proceedings of the 6th European Conference on Computational Mechanics, 11.-15. Juni 2018, Glasgow, UK., [Konferenzveröffentlichung]

Felger, Julian ; Rosendahl, Philipp ; Frey, Christopher ; Becker, Wilfried (2018):
Das Konzept der finiten Bruchmechanik zur Analyse von Rissentstehung an Materialübergängen.
In: DVM-Tagung, 20./21. Februar 2018, Paderborn. DVM-Bericht 250: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendunge, S. 99-109., [Konferenzveröffentlichung]

Hell, Sascha (2018):
Beiträge zur Analyse und Bewertung von 3D-Spannungssingularitäten mittels einer angereicherten Skalierte-Rand-Finite-Elemente-Methode.
Darmstadt, Technische Universität, [Online-Edition: https://tuprints.ulb.tu-darmstadt.de/8128],
[Dissertation]

Rosendahl, Philipp ; Becker, Wilfried (2018):
On the upper bound of finite crack lengths in mixed mode fracture problems.
In: 1st Finite Fracture Mechanics Workshop, La Thuile, Italien, 13-14 April 2018, [Konferenzveröffentlichung]

Rosendahl, Philipp ; Drass, Michael ; Schneider, Jens ; Becker, Wilfried (2018):
Crack nucleation in hyperelastic adhesive bonds.
In: Engineered Transparency 2018. Glass in Architecture and Structural Engineering, ce/papers 2 (2018) No. 5-6, S. 409-425., DOI: 10.1002/cepa.941,
[Konferenzveröffentlichung]

Stein, Nicolas ; Becker, Wilfried (2018):
Assessment of structural adhesive bondings of arbitrary lap joint design using finite fracture mechanics.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-35., [Artikel]

Stein, Nicolas ; Rosendahl, Philipp ; Becker, Wilfried (2018):
Modelling load transfer and mixedmode fracture of ductile adhesive composite joints.
In: International Journal of Adhesion and Adhesives, S. 299-310, 82, ISSN 0143-7496,
DOI: 10.1016/j.ijadhadh.2018.01.013,
[Artikel]

Talmon l'Armée, Andreas ; Becker, Wilfried (2018):
Coupled stress and energy criterion for composite failure in single lap adhesive joints.
In: Proceedings of the 7th International Symposium on Aircraft Materials (ACMA2018). 24.-26. April 2018, Compiegne (Frankreich), Hrsg.: A. Benjeddou und Z. Aboura. S. 213-224., [Konferenzveröffentlichung]

2017

Mittelstedt, C. ; Becker, Wilfried (2017):
Strukturmechanik ebener Laminate.
Darmstadt, Studienbereich Mechnik, Technische Universität Darmstadt, ISBN 978-3-935868-99-0,
[Buch]

Dölling, Sebastian ; Stein, Nicolas ; Chalkiadaki, K. ; Becker, Wilfried ; Weißgraeber, Philipp (2017):
An enhanced XFEM for modelling crack deflection in adhesive joints.
In: Proceedings of ICF 14, Hrsg.: E. E. Gdoutos, In: International Conference on Fracture, Rhodes, Greece, 18-23 June 2017, [Konferenzveröffentlichung]

Felger, Julian ; Becker, Wilfried (2017):
Asymptotic analysis of notch induced crack nucleation.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 239-240, 17, ISSN 1617-7061,
DOI: 10.1002/pamm.201710089,
[Artikel]

Felger, Julian ; Becker, Wilfried (2017):
A complex potential method for the asymptotic solution of wedge problems using first-order shear deformation plate theory.
In: European Journal of Mechanics - A/Solids, S. 383-392, 61, ISSN 0997-7538,
DOI: 10.1016/j.euromechsol.2016.09.016,
[Artikel]

Felger, Julian ; Rosendahl, Philipp ; Stein, Nicolas ; Becker, Wilfried (2017):
Finite Bruchmechanik: Bewertung von singulären und nichtsingulären Spannungskonzentrationen.
In: DVM-Bericht 249: Bruchmechanische Werkstoffund Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, In: 49. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, Mittweida, 14./15.02.2017, [Konferenzveröffentlichung]

Felger, Julian ; Stein, Nicolas ; Becker, Wilfried (2017):
Asymptotic finite fracture mechanics solution for crack onset at elliptical holes in composite plates of finite width.
In: Engineering Fracture Mechanics, Elsevier, S. 621-634, 182, ISSN 0013-7944,
[Online-Edition: https://dx.doi.org/10.1016/j.engfracmech.2017.05.048],
[Artikel]

Felger, Julian ; Stein, Nicolas ; Becker, Wilfried (2017):
Mixed-mode fracture in openhole composite plates of finite-width: an asymptotic coupled stress and energy approach.
In: International Journal of Solids and Structures, Elsevier, S. 14-24, 122–123, ISSN 0020-7683,
[Online-Edition: https://dx.doi.org/10.1016/j.ijsolstr.2017.05.039],
[Artikel]

Felger, Julian ; Stein, Nicolas ; Becker, Wilfried (2017):
An asymptotic approach to mixed-mode fracture in open-hole composite plates.
In: Proceedings of ICF 14, Hrsg.: E. E. Gdoutos, In: International Conference on Fracture, Rhodes, Greece, 18-23 June 2017, [Konferenzveröffentlichung]

Hell, Sascha ; Becker, Wilfried (2017):
Analysis of 3D crack configurations in cross-ply laminates by means of finite fracture mechanics and the enriched SBFEM.
In: Proceedings of ICF 14, Hrsg.: E. E. Gdoutos, In: International Conference on Fracture, Rhodes, Greece, 18-23 June 2017, [Konferenzveröffentlichung]

Ivanova, J. ; Petrova, T. ; Kirilova, E. ; Becker, Wilfried (2017):
Optimal parameters of a dynamically loaded patch/layer structure against the elastic-brittle interface debonding.
In: Engineering Transactions, S. 97-103, 65, [Artikel]

Jung, Jonathan Daniel (2017):
Skalierte Rand-Finite-Elemente-Methode für beliebig profilierte Lamiat-Lichtbau-Balken.
Darmstadt, TU Darmstadt, In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt, 43, ISBN 978-3-935868-43-3,
[Dissertation]

Jung, Jonathan Daniel ; Becker, Wilfried (2017):
A scaled boundary finite element formulation for composite beams of arbitrary cross-section.
In: Proceedings of the 21st International Conference on Composite Materials, ICCM21, 20.-25. August 2017, Xi’An. Beitrag 4356., [Konferenzveröffentlichung]

Kirilova, E. ; Becker, Wilfried ; Ivanova, J. ; Petrova, T. (2017):
Effect of an interface defect in a patch/layer joint under dynamic time harmonic load.
In: In: Proceedings of 11th Conference of Steel and Composite Construction, 23./24. November 2017, Coimbra, Portugal, S. 795-805. Auch als CE/papers 1 (2017) No. 4, S. 487-496., DOI: 10.1002/cepa.543,
[Konferenzveröffentlichung]

Kirilova, E. ; Petrova, T. ; Becker, Wilfried ; Ivanova, J. (2017):
Influence of the geometry and the frequency range on the interface delamination in smart patch/layer structures under combined dynamic loading.
In: Zeitschrift für Angewandte Mathematik und Mechanik - ZAMM, WILEY-VCH, S. 1136-1146, 97, (9), ISSN 1521-4001,
[Online-Edition: https://doi.org/10.1002/zamm.201600273],
[Artikel]

Mardani, Houman ; Stein, Nicolas ; Becker, Wilfried (2017):
Stress predictions for arbitrary elasticperfectly plastic adhesive joints.
In: Book of Abstracts, In: 4th International Conference on Structural Adhesive Bonding - AB2017, Porto, Portugal, 06./07.July 2017, [Konferenzveröffentlichung]

Massow, Holger ; Becker, Wilfried (2017):
Homogenized effective properties of foldcore structures.
In: Proceedings of the ICCE-25, In: 25th International Conference on Composites Engineering ICCE-25, Rom, Italy, 16.-22. July 2017, [Konferenzveröffentlichung]

Petrova, T. ; Becker, Wilfried ; Kirilova, E. ; Ivanova, J. (2017):
Modeling of smart patch/layer joints under dynamic time harmonic load with interface defect.
In: In: Proceedings of 11th Conference of Steel and Composite Construction, 23./24. November 2017, Coimbra, Portugal, S. 953-963. Auch CE/papers 1 (2017) No. 4, S. 438-447., DOI: 10.1002/cepa.548,
[Konferenzveröffentlichung]

Rosendahl, Philipp ; Becker, Wilfried (2017):
Silicone sealants: a finite fracture mechanics failure model for non-linear materials.
In: Proceedings of ICF 14, Hrsg.: E. E. Gdoutos, In: International Conference on Fracture, Rhodes, Greece, 18-23 June 2017, [Konferenzveröffentlichung]

Rosendahl, Philipp ; Stein, Nicolas ; Becker, Wilfried (2017):
Stress solutions for joints with nonlinear adhesives.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 341-342, 17, ISSN 1617-7061,
DOI: 10.1002/pamm.201710140,
[Artikel]

Rosendahl, Philipp ; Stein, Nicolas ; Becker, Wilfried (2017):
A general stress analysis and failure model for ductile adhesive joints.
In: Book of Abstracts, In: 4th International Conference on Structural Adhesive Bonding - AB2017, 06./07.July 2017, Porto, Portugal, [Konferenzveröffentlichung]

Rosendahl, Philipp ; Weißgraeber, Philipp ; Stein, Nicolas ; Becker, Wilfried (2017):
Asymmetric crack onset at open-holes under tensile and in-plane bending loading.
In: International Journal of Solids and Structures, Elsevier, S. 10-23, 113-114, ISSN 0020-7683,
[Online-Edition: https://doi.org/10.1016/j.ijsolstr.2016.09.011],
[Artikel]

Siegl, Benjamin (2017):
Zur instationären Unwuchtidentifikation : Modellgestütztes Auswuchten von Rotoren mit drehzahlveränderlichen Parametern.
Düsseldorf, VDI Verlag GmbH, TU Darmstadt, In: Fortschritt Berichte VDI. Reihe 11, Schwingungstechnik, 352, ISBN 978-3-18-335211-1,
[Dissertation]

Stein, Nicolas ; Dölling, Sebastian ; Chalkiadaki, K. ; Becker, Wilfried (2017):
Adhesive joint strength and crack pattern predictions by means of an enhanced XFEM.
In: Book of Abstracts, In: 4th International Conference on Structural Adhesive Bonding - AB2017, Porto, Portugal, 06./07.July 2017, [Konferenzveröffentlichung]

Stein, Nicolas ; Dölling, Sebastian ; Chalkiadaki, K. ; Becker, Wilfried ; Weißgraeber, Philipp (2017):
Enhanced XFEM for crack deflection in multi-material joints.
In: International Journal of Fracture, S. 193-210, 207, (2), ISSN 0376-9429,
[Online-Edition: https://doi.org/10.1007/s10704-017-0228-9],
[Artikel]

Stein, Nicolas ; Dölling, Sebastian ; Chalkiadaki, K. ; Becker, Wilfried ; Weißgraeber, Philipp (2017):
Enhanced XFEM for crack deflection in multi-material joints.
In: International Journal of Fracture, S. 193-210, 207, (2), ISSN 0376-9429 (Print) 1573-2673 (Online),
DOI: 10.1007/s10704-017-0228-9,
[Artikel]

Stein, Nicolas ; Felger, Julian ; Becker, Wilfried (2017):
Analytical models for functionally graded adhesive single lap joints: a review and comparative study.
In: International Journal of Adhesion and Adhesives, S. 70-82, 76, ISSN 0143-7496,
[Online-Edition: https://doi.org/10.1016/j.ijadhadh.2017.02.001],
[Artikel]

Stein, Nicolas ; Rosendahl, Philipp ; Becker, Wilfried (2017):
Homogenization of mechanical and thermal stresses in functionally graded adhesive joints.
In: Composites Part B: Engineering, S. 279-293, 111, ISSN 1359-8368,
[Online-Edition: https://doi.org/10.1016/j.compositesb.2016.11.061],
[Artikel]

Talmon l'Armée, Andreas ; Hell, Sascha ; Rosendahl, Philipp ; Felger, Julian ; Becker, Wilfried (2017):
Nonlinear crack opening integral: Mode mixity for finite cracks.
In: Engineering Fracture Mechanics, Elsevier, S. 283-299, 186, ISSN 0013-7944,
DOI: 10.1016/j.engfracmech.2017.10.006,
[Artikel]

2016

Fahlbusch, Nina-Carolin (2016):
Entwicklung und Analyse mikromechanischer Modelle zur Beschreibung des Effektivverhaltens von geschlossenzelligen Polymerschäumen.
Darmstadt, Studienbereich Mechanik, TU Darmstadt, TU Darmstadt, In: Forschungsberichte des Instituts Mechanik der Technischen Universität Darmstadt, 37, ISBN 978-3-935868-37-2,
[Dissertation]

Fahlbusch, N.-C. ; Becker, Wilfried ; Kolupaev, V. A. ; Geertz, G. (2016):
Non-linear material behaviour and failure of closed-cell polymer foams.
In: Acta Mechanica, Springer, S. 3113-3121, 227, ISSN 0001-5970,
[Online-Edition: http://dx.doi.org/10.1007/s00707-015-1533-x],
[Artikel]

Fahlbusch, N.-C. ; Grenestedt, J. L. ; Becker, Wilfried (2016):
Effective Failure Behavior of an Analytical and a Numerical Model for Closed-Cell Foams.
In: International Journal of Solids and Structures, Elsevier, S. 417-430, 97-98, ISSN 0020-7683,
[Online-Edition: https://doi.org/10.1016/j.ijsolstr.2016.07.007],
[Artikel]

Fahlbusch, N.-C. ; Kolupaev, V. A. ; Becker, Wilfried (2016):
Generalized Limit Surfaces – With an Example of Hard Foams.
In: Advanced Methods of Continuum Mechanics for Materials and Structures, Springer, Hrsg.: K. Naumenko und M. Aßmus. Reihe Advanced Structured Materials, S. 337-365, (60), [Artikel]

Felger, Julian ; Becker, Wilfried (2016):
Asymptotic near-field analyses of wedges in anisotropic composite plates using the first-order shear deformation plate theory.
In: Procedia Structural Integrity, In: 21st European Conference on Fracture, Catania, Italien, 20-24 June 2016, 2 (2016), [Konferenzveröffentlichung]

Felger, Julian ; Becker, Wilfried (2016):
Closed-form solutions for stress singularities at bimaterial wedges in Reissner-Mindlin plates.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 121-122, 16, ISSN 1617-7061,
[Online-Edition: https://doi.org/10.1002/pamm.201610049],
[Artikel]

Goswami, S. ; Becker, Wilfried (2016):
Analysis of sandwich plates with compressible core using layerwise refined plate theory and interface stress continuity.
In: Journal of Composite Materials, SAGE, S. 201-217, 50, ISSN 0021-9983,
[Artikel]

Hell, Sascha ; Becker, Wilfried (2016):
Determination of singularity exponents in 3D elasticity problems using enriched base functions in the Scaled Boundary Finite Element Method.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 137-138, 16, ISSN 1617-7061,
[Online-Edition: https://doi.org/10.1002/pamm.201610057],
[Artikel]

Hell, Sascha ; Becker, Wilfried (2016):
Energy release rates at two perpenticularly meeting cracks by use of the Scaled Boundary Finite Element Method.
In: Procedia Structural Integrity, In: 21st European Conference on Fracture, Catania, Italien, 20-24 June 2016, 2 (2016), [Konferenzveröffentlichung]

Hell, Sascha ; Becker, Wilfried (2016):
The use of enriched base functions in the threedimensional Scaled Boundary Finite Element Method.
In: Proceedings, Hrsg.: M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris, In: ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering, Kreta, Griechenland, 5-10 June 2016, [Konferenzveröffentlichung]

Ivanova, J. ; Valeva, V. ; Yanakieva, A. ; Petrova, T. ; Becker, Wilfried (2016):
Damage of bi-material structures and reinforced composites with different industrial applications.
In: Journal of Sustainable Development of Energy, Water and Environment Systems, S. 23-37, 4, ISSN 1848-9257,
[Artikel]

Jung, Jonathan Daniel ; Becker, Wilfried (2016):
Semi-analytical modelling of composite beams using the scaled boundary finite element method.
In: Composite Structures, S. 121-129, 137, ISSN 0263-8223,
[Artikel]

Mardani, Houman ; Stein, Nicolas ; Becker, Wilfried (2016):
The stress in single lap joints with a functionally graded adhesive bondline: an efficient modelling approach.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 219-220, 16, ISSN 1617-7061,
[Online-Edition: https://doi.org/10.1002/pamm.201610098],
[Artikel]

Massow, Holger ; Becker, Wilfried (2016):
Foldcore Structures and Their Numerical Homogenisation.
In: WSEAS Transactions on Applied and Theoretical Mechanics, S. 212-219, 11, [Artikel]

Massow, Holger ; Becker, Wilfried (2016):
Foldcore structures and their effective elastic properties.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 22600-02, [Artikel]

Petrova, T. ; Kirilova, E. ; Becker, Wilfried ; Vaklieva-Bancheva, N. ; Ivanova, J. (2016):
Optimal analysis of adhesive lightweight joints.
In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 1-11,, John Wiley and Sons, ISSN 0044-2267,
[Online-Edition: http://dx.doi.org/10.1002/zamm.201600006],
[Artikel]

Rosendahl, Philipp ; Weißgraeber, Philipp ; Stein, Nicolas ; Becker, Wilfried (2016):
Assessment of asymmetric crack initiation in open-hole plates using a coupled stress and energy criterion.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 165-166, 16, ISSN 1617-7061,
[Online-Edition: https://doi.org/10.1002/pamm.201610071],
[Artikel]

Rosendahl, Philipp ; Weißgraeber, Philipp ; Stein, Nicolas ; Becker, Wilfried (2016):
A numerical finite fracture mechanics approach on asymmetric cracks in open-hole plates.
In: Procedia Structural Integrity, In: 21st European Conference on Fracture, Catania, Italien, 20-24 June 2016, 2 (2016), [Konferenzveröffentlichung]

Stein, Nicolas ; Mardani, Houman ; Becker, Wilfried (2016):
An efficient analysis model for functionally graded adhesive single lap joints.
In: International Journal of Adhesion and Adhesives, S. 117-125, 70, ISSN 0143-7496,
[Online-Edition: https://doi.org/10.1016/j.ijadhadh.2016.06.001],
[Artikel]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2016):
Brittle failure in adhesive lap joints – a general Finite Fracture Mechanics approach.
In: Procedia Structural Integrity, In: 21st European Conference on Fracture, Catania, Italien, 20-24 June 2016, 2 (2016), [Konferenzveröffentlichung]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2016):
Strength prediction of arbitrarily shaped adhesive lap joints by means of finite fracture mechanics: effects of stress and energy criteria.
In: Proceedings ACMA 2016, In: International Symposium on Aircraft Materials, Agadir, Marokko, 11.-13. Mai 2016, [Konferenzveröffentlichung]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2016):
Stress solution for functionally graded adhesive joints.
In: Journal of Solids and Structures, S. 300-311, 97-98, [Online-Edition: https://doi.org/10.1016/j.ijsolstr.2016.07.019],
[Artikel]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2016):
A coupled stress and energy failure model for crack initiation in arbitrary shaped adhesive joints.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 175-176, 16, ISSN 1617-7061,
[Online-Edition: https://doi.org/10.1002/pamm.201610076],
[Artikel]

Talmon l'Armée, Andreas ; Stein, Nicolas ; Becker, Wilfried (2016):
Bending moment calculation for single lap joints with composite laminate adherends including bending extensional coupling.
In: International Journal of Adhesion and Adhesives, S. 41-52, 66, ISSN 0143-7496,
[Artikel]

Weißgraeber, Philipp ; Felger, Julian ; Geipel, Dennis ; Becker, Wilfried (2016):
Cracks at elliptical holes: stress intensity factor and Finite Fracture Mechanics solution.
In: European Journal of Mechanics - A/Solids, S. 192-198, 55, ISSN 0997-7538,
[Artikel]

Weißgraeber, Philipp ; Hell, Sascha ; Becker, Wilfried (2016):
Crack nucleation in negative geometries.
In: Engineering Fracture Mechanics, Elsevier, S. 93-104, 168, (B), ISSN 0013-7944,
[Online-Edition: https://doi.org/10.1016/j.engfracmech.2016.02.045],
[Artikel]

Weißgraeber, Philipp ; Leguillon, D. ; Becker, Wilfried (2016):
A review of finite fracture mechanics: Crack initiation at singular and non-singular stress-raiser.
In: Archive of Applied Mechanics, Springer, S. 375-401, 86, (1), ISSN 0939-1533,
[Online-Edition: http://dx.doi.org/10.1007/s00419-015-1091-7],
[Artikel]

2015

Dieringer, Rolf (2015):
Erweiterungen der Rand-Finite-Elemente-Methode zur Analyse von Platten und Laminaten mit besonderem Fokus auf der Ermittlung von Singularitätsordnungen an Rissen und Kerben.
Darmstadt, Studienbereich Mechanik, Technische Universität Darmstadt, TU Darmstadt, In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt, Band 36, ISBN 978-3-935868-36-5,
[Online-Edition: http://tuprints.ulb.tu-darmstadt.de/4592],
[Dissertation]

Dieringer, Rolf ; Becker, Wilfried (2015):
A new scaled boundary finite element formulation for the computation of singularity orders at cracks and notches in arbitrarily laminated composites.
In: Composite Structures, S. 263-270, 123, ISSN 0263-8223,
[Artikel]

Felger, Julian ; Becker, Wilfried (2015):
On corner singularities in Reissner's theory of elastic plates.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 127-128, 15, ISSN 1617-7061,
[Artikel]

Hell, Sascha ; Becker, Wilfried (2015):
Analysis of three-dimensional crack configurations in composite laminates using the Scaled Boundary Finite Element Method.
In: Proceedings, In: 8th International Congress of Croatian Society of Mechanics, Opatija, Kroatien, 29.09-02.10.2015, [Konferenzveröffentlichung]

Hell, Sascha ; Becker, Wilfried (2015):
Scaled Boundary Finite Element Analysis of threedimensional crack configurations in laminate structures.
In: E-Proceedings, Beitrag 1274, In: 6th International Conference on Computational Methods, ICCM2015, Auckland, 14.-17. Juli 2015, [Konferenzveröffentlichung]

Hell, Sascha ; Becker, Wilfried (2015):
The scaled boundary finite element method for the analysis of 3D crack interaction.
In: Journal of Computational Science, S. 76-81, 9, ISSN 1877-7503,
[Online-Edition: http://dx.doi.org/10.1016/j.jocs.2015.04.007],
[Artikel]

Jung, Jonathan Daniel ; Becker, Wilfried (2015):
Semi-analytic analysis of composite beams using the scaled boundary finite element method.
In: Proceedings of the SPB 2015, In: International Conference on Shells, Plates and Beams, SPB 2015, Bologna, 9.-11. September 2015, [Konferenzveröffentlichung]

Katz, Sebastian (2015):
Reduktion niederfrequenter Schwingungen von Windenergieanlagen durch Tilgersysteme.
Darmstadt, TU Darmstadt, In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt ; Bd. 36, ISBN 978-3-935868-38-9,
[Dissertation]

Kolupaev, V. A. ; Becker, Wilfried ; Massow, Holger ; Kiegelmann, E. M. (2015):
Mit Schaumstoffen zuverlässig konstruieren – Biaxialer Zugversuch ermöglicht Abschätzung der Grenzbelastung bei Polymerschäumen.
In: Kunststoffe 2,, S. 42-46, [Artikel]

Kolupaev, V. A. ; Becker, Wilfried ; Massow, Holger ; Kiegelmann, E. M. (2015):
Reliable designs in foam - biaxial tensile test for estimating the limiting load for polymer foams.
In: Kunststoffe international, S. 32-35, 1-2, ISSN 1862-4243,
[Artikel]

Petrova, T. ; Kirilova, E. ; Becker, Wilfried ; Ivanova, J. (2015):
Monitoring of adhesive joint used in lightweight devices.
In: PLISKA Studia Mathematica, S. 119-128, 25, [Artikel]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2015):
An effcient model for the analysis of crack onset in arbitrary adhesively bonded joints.
In: Book of Abstracts, Beitrag AB1533, In: 3rd International Conference on Structural Adhesive Bonding AB2015, Porto, 2.-3.Juli 2015, [Konferenzveröffentlichung]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2015):
A general Finite Fracture Mechanics model for crack initiation in adhesive lap joints.
In: Book of Abstracts, In: International Conference on Computational Modeling of Fracture and Failure, CFRAC 2015, Paris, 3.-5. Juni 2015, [Konferenzveröffentlichung]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2015):
A model for brittle failure in adhesive lap joints of arbitrary joint configuration.
In: Composite Structures, S. 707-718, 133, ISSN 0263-8223,
[Artikel]

Stein, Nicolas ; Weißgraeber, Philipp ; Dölling, Sebastian ; Becker, Wilfried (2015):
Crack deflection at bimaterial interfaces with the cohesive segments method.
In: Book of Abstracts (Hrsg.: R. Kienzler und S. Boettcher), In: 7th International Symposium on Defect and Material Mechanics, Bremen, 14.-17. September 2015, [Konferenzveröffentlichung]

Unsinn, Michael ; Becker, Wilfried (2015):
Interlaminar stresses in curved sections of composite box beams.
In: Proceedings of the SPB 2015, In: International Conference on Shells, Plates and Beams, SPB 2015, Bologna, 9.-11. September 2015, [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Felger, Julian ; Becker, Wilfried (2015):
Crack initiation in elliptically notched plates.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 163-164, 15, ISSN 1617-7061,
[Artikel]

Weißgraeber, Philipp ; Felger, Julian ; Talmon l'Armée, Andreas ; Becker, Wilfried (2015):
Crack initiation in single lap joints: Effects of geometrical and material properties.
In: International Journal of Fracture,, (Febr.), [Online-Edition: http://dx.doi.org/10.1007/s10704-015-9992-6],
[Artikel]

2014

Modniks, J. ; Sparnins, E. ; Andersons, J. ; Becker, Wilfried (2014):
Analysis of the effect of a stress raiser on the strength of a UD flax/epoxy composite in off-axis tension.
In: Journal of Composite Materials,, [Online-Edition: http://dx.doi.org/10.1177/0021998314528827],
[Artikel]

Becker, Wilfried (2014):
Available settings for stress analysis and strength assessment of laminate structures.
In: 18th International Conference Mechanics of Composite Materials, 2.-6. Juni 2014, Riga, Book of Abstracts, S. 42., [Konferenzveröffentlichung]

Becker, Wilfried (2014):
Available theories for an analysis of stresses and assessment of strength of laminate structures.
In: Mechanics of Composite Materials 50,, S. 545-552, [Artikel]

Becker, Wilfried ; Valeva, V. ; Petrova, T. ; Ivanova, J. (2014):
Monitoring of piezo single lap joints under static loading.
In: Proceedings of the 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20.-27.09.2014, Venedig-Istanbul, Beitrag SDEWES2014.0194., [Konferenzveröffentlichung]

Becker, Wilfried ; Valeva, V. ; Petrova, T. ; Ivanova, J. (2014):
Technical damage in wind rotor blade under static load at environment conditions.
In: Chemical Engineering Transactions 42,, [Artikel]

Fahlbusch, N.-C. ; Becker, Wilfried (2014):
Non-linear material behaviour and failure of closed-cell polymer foams.
In: Proceedings of the XIV th Pan-American Congress of Applied Mechanics. 24.-28.03.2014, Santiago, Chile., [Konferenzveröffentlichung]

Fahlbusch, N.-C. ; Becker, Wilfried ; Kolupaev, V. A. (2014):
Failure behaviour of closedcell polymer foams – the necessity of advanced failure prediction.
In: Tagungsproceedings CellMAT 2014 - Cellular Materials, 22.-24. Oktober 2014, Dresden, Beitrag A3-MID7., [Konferenzveröffentlichung]

Felger, Julian ; Weißgraeber, Philipp ; Becker, Wilfried (2014):
Effect of unsupported adherend length on failure load of single lap joints.
In: 10th European Conference on Adhesion – Papers. Hrsg.: J. M. Martin-Martinez und J. C. Suarez-Bermejo. S. 219-222., [Konferenzveröffentlichung]

Guo, Y. ; Becker, Wilfried ; Fu, Y. ; Zhang, W. (2014):
Package Cushioning Properties of Corrugated Paperboard Pads with Hollow Pillars.
In: The Second International Conference on Packaging Technology and Science, 16.-18.10.2014, Wuxi, Book of Abstracts, Beitrag YB002., [Konferenzveröffentlichung]

Hell, Sascha ; Becker, Wilfried (2014):
Hypersingularities in three-dimensional crack configurations in composite laminates.
In: Key Engineering Materials Vols. 577-578,, S. 209-212, [Artikel]

Hell, Sascha ; Becker, Wilfried (2014):
Hypersingularities in three-dimensional crack configurations in composite laminates.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 44,, S. 157-158, [Artikel]

Hell, Sascha ; Weißgraeber, Philipp ; Felger, Julian ; Becker, Wilfried (2014):
A coupled stress and energy criterion for the assessment of crack initiation in single lap joints: a numerical approach.
In: Engineering Fracture Mechanics 117,, S. 112-126, [Online-Edition: http://dx.doi.org/10.1016/j.engfracmech.2014.01.012],
[Artikel]

Ivanova, J. ; Nikolova, G. ; Becker, Wilfried ; Gambin, B. (2014):
Interface behaviour of a bi-material plate under dynamic loading. Cohesive interface debonding.
In: Zeitschrift für Angewandte Mathematik und Mechanik ZAMM,, S. 1-12, [Online-Edition: http://dx.doi.org/10.1002/zamm.201300119],
[Artikel]

Ivanova, J. ; Valeva, V. ; Petrova, T. ; Becker, Wilfried (2014):
Interfacial debonding of a piezoelastic bi-material structure applicable for wind rotor blades.
In: Mechanics of Advanced Materials and Structures,, [Online-Edition: http://dx.doi.org/10.1080/15376494.2013.864433],
[Artikel]

Ivanova, J. ; Valeva, V. ; Petrova, T. ; Becker, Wilfried (2014):
Piezo health monitoring of adhesive joints.
In: Proceedings of the 9th Conference on Sustainable Development of Energy, Water and Environment Systems, 20.-27.09.2014, Venedig-Istanbul, Beitrag SDEWES2014.0202., [Konferenzveröffentlichung]

Ivanova, J. ; Valeva, V. ; Petrova, T. ; Becker, Wilfried ; Yanakieva, A. (2014):
Interface Delamination of Bi-Material Structures with Different Industrial Applications in Energy Structures.
In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29.6.-3.7.2014, Ohrid, Mazedonien, Digital Proceediings (ISSN: 1847-7178), Beitrag SEE2014.0093., In: 1st South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29.6.-3.7.2014, Ohrid, Mazedonien, [Konferenzveröffentlichung]

Jung, Jonathan Daniel ; Becker, Wilfried (2014):
SBFEM elements for thin-walled composite beams with arbitrary layup.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 44,, S. 267-268, [Artikel]

Kolupaev, V. A. ; Becker, Wilfried ; Massow, Holger (2014):
Failure of Hard Foams under Multiaxial Loading.
In: Tagungsband PolyMerTec14, Problemseminar Deformation und Bruchverhalten von Kunststoffen, 25.-27.06.2014, Hochschulcampus Merseburg, S. 183-186., [Konferenzveröffentlichung]

Kolupaev, V. A. ; Becker, Wilfried ; Massow, Holger ; Dierkes, D. (2014):
Auslegung von Probekörpern aus Hartschaum zur Ermittlung der biaxialen Zugfestigkeit.
In: Forschung im Ingenieurwesen 78,, S. 69-86, [Online-Edition: http://dx.doi.org/10.1007/S10010-014-0175-9],
[Artikel]

Kolupaev, V. A. ; Becker, Wilfried ; Massow, Holger ; Kiegelmann, E. M. (2014):
2d-tension loading on hard foams and ceramics.
In: 18th International Conference Mechanics of Composite Materials, 2.-6. Juni 2014, Riga, Book of Abstracts, S. 99., [Konferenzveröffentlichung]

Kolupaev, V. A. ; Fahlbusch, N.-C. ; Massow, Holger ; Becker, Wilfried (2014):
Multi-Axial Tests on Hard Foams.
In: Tagungsproceedings CellMAT 2014 - Cellular Materials, 22.- 24. Oktober 2014, Dresden, Beitrag B1-MID8., [Konferenzveröffentlichung]

Massow, Holger ; Becker, Wilfried (2014):
Determination of the effective elasticity tensor of a folded sandwich core.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 44,, S. 535-536, [Artikel]

Massow, Holger ; Becker, Wilfried (2014):
Determination of the effective mechanical properties of a folded sandwich core.
In: Proceedings of the ACMA 2014 International Symposium on Aircraft Materials, 23.-26.04.2014, Marrakech, Marokko., [Konferenzveröffentlichung]

Modniks, J. ; Sparnins, E. ; Andersons, J. ; Becker, Wilfried (2014):
Modeling of a stress raiser influence on the strength of UD/flax composite.
In: 18th International Conference Mechanics of Composite Materials, 2.-6. Juni 2014, Riga, Book of Abstracts, S. 132., In: 18th International Conference Mechanics of Composite Materials, [Konferenzveröffentlichung]

Stein, Nicolas ; Weißgraeber, Philipp ; Becker, Wilfried (2014):
Analysis of adhesive joints containing cracks in the adhesive layer.
In: 10th European Conference on Adhesion – Papers. Hrsg.: J. M. Martin-Martinez und J. C. Suarez-Bermejo. S. 187-190., [Konferenzveröffentlichung]

Weißgraeber, Philipp (2014):
Neue Ansätze zur Analyse der Lastübertragung und Initiierung finiter Risse in Klebverbindungen.
Darmstadt, Studienbereich Mechanik, TU Darmstadt, In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt, 33, ISBN 978-3-935868-33-4,
[Online-Edition: http://tuprints.ulb.tu-darmstadt.de/4288],
[Buch]

Weißgraeber, Philipp ; Becker, Wilfried (2014):
Crack initiation at weak stress singularities — Finite Fracture Mechanics approach. Procedia Materials Science 3.
In: Procedia Materials Science 3,, S. 153-158, [Artikel]

Weißgraeber, Philipp ; Hell, Sascha ; Becker, Wilfried (2014):
Initiation of finite cracks in non-positive geometries.
In: Proceedings of the 16th European Conference on Composite Materials, ECCM-16, Sevilla, Spanien, 22.-26.06.2014, 26.2.2-R6., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Stein, Nicolas ; Becker, Wilfried (2014):
A general sandwich-type model for the analysis of adhesive joints with composite or isotropic adherents.
In: International Journal of Adhesion and Adhesives 55,, S. 56-63, [Artikel]

2013

Dieringer, Rolf ; Becker, Wilfried (2013):
Determination of singularity orders at notches and cracks in composites using a new formulation of the scaled boundary finite element method.
In: Proceedings of the 17th International Conference on Composite Structures, 17.-20. Juni 2013, Porto, Portugal (2013), Hrsg.: A. J. M. Ferreira., [Konferenzveröffentlichung]

Goswami, S. ; Becker, Wilfried (2013):
A New Rectangular Finite Element Formulation Based on Higher Order Displacement Theory for Thick and Thin Composite and Sandwich Plates.
In: World Journal of Mechanics 3., S. 194-201, [Artikel]

Guo, Y. ; Becker, Wilfried ; Xu, W. (2013):
Vertical static compression performance of honeycomb paperboard.
In: International Journal of Materials Research 6., S. 598-602, [Artikel]

Ivanova, J. ; Valeva, V. ; Petrova, T. ; Becker, Wilfried (2013):
Hygropiezothermoelastic Interface Delamination of a Bi-material Plate.
In: Proceedings of the 8th Conference on Sustainable Development of Energy, Water and Environmental Systems, 22.-27.09.2013, Dubrovnik, Kroatien, contribution 0929., [Konferenzveröffentlichung]

Ivanova, J. ; Valeva, V. ; Petrova, T. ; Becker, Wilfried (2013):
Shear-lag hygrothermalpiezoelectric model for a bi-material structure.
In: 12th National Congress on Theoretical and Applied Mechanics, 23.-26.09.2013, St. Constantine and Helena Resort, Varna, Bulgarien., [Konferenzveröffentlichung]

Jung, Jonathan Daniel ; Becker, Wilfried (2013):
An SBFEM element for thin-walled beams.
In: International Journal of Aerospace and Lightweight Structures 3,, S. 207-220, [Artikel]

Jung, Jonathan Daniel ; Becker, Wilfried (2013):
An SBFEM element for thin-walled beams.
In: Proceedings of the 5th Asia Pacific Congress on Computational Mechanics and 4th International Symposium on Computational Mechanics, 11th-14th Dec. 2013, Singapore, Paper 1039., [Konferenzveröffentlichung]

Kolupaev, V. A. ; Becker, Wilfried ; Dierkes, D. ; Massow, Holger (2013):
Specimen for Biaxial Tension Test on Hard Foams.
In: 7th International Conference on Advanced Computational Engineering and Experimenting ACEX2013, 1.-4.07.2013, Madrid. Book of Abstracts., [Konferenzveröffentlichung]

Kroker, Andreas Markus (2013):
Strukturmechanische Modellierung und Analyse des Tragverhaltens von dünnwandigen hochbelasteten Composite-Biege- und Querkraftträgern.
Darmstadt, Studienbereich Mechanik, TU Darmstadt, In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt, 28, ISBN 978-3-935868-28-0,
[Online-Edition: http://tuprints.ulb.tu-darmstadt.de/3289/],
[Dissertation]

Kroker, Andreas Markus ; Becker, Wilfried (2013):
Hochbelastbare CFK-Biege- und CFK-Querkraftträger: Angepasste Balkentheorien höherer Ordnung.
In: Stahlbau 82., S. 459-463, [Artikel]

Lindemann, Jan (2013):
Der Laminatrandeffekt und seine Analyse, insbesondere mit der Rand-Finite-Elemente-Methode.
Darmstadt, TU, Inst. für Mechanik, TU Darmstadt, ISBN 978-3-935868-30-3,
[Dissertation]

Massow, Holger ; Becker, Wilfried (2013):
Numerical Homogenization of a Folded Sandwich Core.
In: Proceedings of the 9th International Conference on Composite Science and Technology ICCST/9 (Hrsg.: Michele Meo), 24.-26.4.2013, Sorrento, Neapel, Italien, S. 782-788., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Becker, Wilfried (2013):
Coupled stress and energy failure models for adhesively bonded single lap joints.
In: 2nd International Conference on Structural Adhesive Bonding, 4./5.7.2013, University of Porto, Porto, Book of Abstracts, S. 23., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Becker, Wilfried (2013):
Finite Fracture Mechanics model for mixed mode fracture in adhesive joints.
In: International Journal of Solids and Structures 50., S. 2383-2394, [Artikel]

Weißgraeber, Philipp ; Becker, Wilfried (2013):
Studies of crack onset by means of Finite Fracture Mechanics approaches.
In: 8th German-Greek-Polish Symposium Recent Advances in Mechanics, 08.-13.09.2013, Goslar, Book of Abstracts (Hrsg.: R. Kienzler und S. Boettcher), S. 87-88., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Becker, Wilfried (2013):
A coupled stress and energy failure model for adhesively bonded single lap joints.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-38., [Artikel]

Weißgraeber, Philipp ; Becker, Wilfried (2013):
A coupled stress and energy model for mixedmode cracking.
In: Proceedings of the 13th International Conference on Fracture ICF13, 16.-21.06.2013, Peking., [Konferenzveröffentlichung]

2012

Mayland, Wibke (2012):
Untersuchungen zu Spannungssingularitätsordnungen in linear-elastischen und piezoelektrischen Multimaterialkonfigurationen mit der Rand-Finite-Elemente-Methode.
Darmstadt, Studienbereich Mechanik, In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt, 25, ISBN 978-3-935868-25-9,
[Online-Edition: urn:nbn:de:tuda-tuprints-30594],
[Buch]

Kratochvil, Jan (2012):
Asymptotic Analysis of the Load Transfer on Double-Lap Bolted Joints.
Darmstadt, Deutschland, Techn. Univ., Studienbereich Mechanik, TU Darmstadt, Fachbereich Maschinenbau, Fachgebiet Strukturmechanik, In: Forschungsbericht // Studienbereich Mechanik, Technische Universität Darmstadt, 24, ISBN 978-3-935868-24-2,
[Online-Edition: urn:nbn:de:tuda-tuprints-29970],
[Dissertation]

Dieringer, Rolf ; Becker, Wilfried (2012):
Experimentelle Analysen und Finite-Elemente-Berechnungen zur Untersuchung der Rissinitiierung in gedruckter organischer Elektronik.
In: DVM-Bericht 244, 44. Tagung des DVM-Arbeitskreises Bruchvorgänge, 14./15.2.2012, Darmstadt, S. 141-150., [Konferenzveröffentlichung]

Dieringer, Rolf ; Becker, Wilfried (2012):
Analysis of Cracked and Notched Composites Applying a New Formulation of the Scaled Boundary Finite Element Method.
In: Proceedings of the Eleventh International Conference on Computational Structures Technology, Dubrovnik, Croatia, 4.-7.9.2012. Paper 44., [Konferenzveröffentlichung]

Dieringer, Rolf ; Becker, Wilfried (2012):
Analysis of notches and cracks in circular Kirchhoff plates using the scaled boundary finite element method.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 12., S. 189-190, [Artikel]

Dieringer, Rolf ; Hebel, Jochen ; Becker, Wilfried (2012):
A new scaled boundary finite element formulation for the analysis of cracks and notches in laminate plates.
In: Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures, 18.-20.06.2012, Politecnico di Torino. Paper 91., [Konferenzveröffentlichung]

Fahlbusch, N.-C. ; Becker, Wilfried (2012):
Postbuckling Analysis of Closed-Cell Foams with a FE-Model Based on Image Processing.
In: Book of Abstracts, 8th European Solid Mechanics Conference. Hrsg.: G. A. Holzapfel, R. W. Ogden. 9.-13. Juli 2012, Graz., [Konferenzveröffentlichung]

Fahlbusch, N.-C. ; Becker, Wilfried (2012):
Microstructural model of a closed-cell foam on the basis of image analysis.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 12., S. 191-192, [Artikel]

Fahlbusch, N.-C. ; Becker, Wilfried ; Geertz, G. ; Kolupaev, V. A. (2012):
Comparing Results from Numerical Homogenization to Experimental Data for Closed-Cell Foams.
In: Proceedings Cellular Materials, Cellmat-Tagung, 7.-9.11.12, Dresden., [Konferenzveröffentlichung]

Goswami, S. ; Becker, Wilfried (2012):
Computation of 3-D stress singularities for multiple cracks and crack intersections by the Scaled Boundary Finite Element Method.
In: International Journal of Fracture 175,, S. 13-25, [Artikel]

Ivanova, J. ; Valeva, V. ; Becker, Wilfried (2012):
Elastic-brittle and cohesive interface behaviour of a bi-material structure under dynamic time harmonic loading application to a wind turbine rotor blade.
In: Compte Rendue de l’Academie Bulgare des Sciences 65., S. 1275-1284, [Artikel]

Kratochvil, Jan ; Becker, Wilfried (2012):
Asymptotic analysis of load transfer by bolted double-lap joints of isotropic plates.
In: Book of Abstracts, 8th European Solid Mechanics Conference. Hrsg.: G. A. Holzapfel, R. W. Ogden. 9.-13. Juli 2012, Graz., [Konferenzveröffentlichung]

Kratochvil, Jan ; Becker, Wilfried (2012):
Asymptotic analysis of stresses in an anisotropic linear elastic plane or half-plane weakened by a finite number of holes.
In: Archive of Applied Mechanics 82,, S. 743-754, [Artikel]

Kratochvil, Jan ; Becker, Wilfried (2012):
Asymptotic formulae for the flexibility of an infinite row of pin-loaded holes.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 12., S. 177-178, [Artikel]

Massow, Holger ; Becker, Wilfried (2012):
Effective mechanical properties of a folded sandwich core.
In: Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures, 18.-20.06.2012, Politecnico di Torino. Paper 96., [Konferenzveröffentlichung]

Mittelstedt, C. (2012):
Buckling and postbuckling of thin-walled stiffened composite panels : efficient analysis methods for lightweight engineering.
[Habilitation]

Sator, Christian ; Becker, Wilfried (2012):
Closed-form solutions for stress singularities at plane bi- and trimaterial junctions.
In: Archive of Applied Mechanics 82,, S. 643-658, [Artikel]

Valeva, V. ; Petrova, T. ; Ivanova, J. ; Becker, Wilfried (2012):
Piezoelastic 1d model for bi-material structure applicable for wind turbine blades.
In: Proceedings of the DCB 2012 conference, International Conference on Civil Engineering Design and Construction (Science and Practice), 13.-15.9.2012, Varna Free University Chernorizets Hrabar, Varna, Bulgaria, S. 412-418., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Becker, Wilfried (2012):
Bewertung der Rissinitiierungslast von Klebverbindungen mit Hilfe der Bruchmechanik finiter Risse.
In: DVM-Bericht 244, 44. Tagung des DVM-Arbeitskreises Bruchvorgänge, 14./15.2.2012, Darmstadt, S. 67-76., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Becker, Wilfried (2012):
Finite Fracture Mechanics for the Assessment of Failure Loads of Adhesive Joints.
In: Proceedings of the Eleventh International Conference on Computational Structures Technology, Dubrovnik, Croatia, 4.- 7.9.2012. Paper 141., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2012):
Buckling of composite panels: A criterion for optimum stiffener design.
In: Aerospace Science and Technology 16., S. 10-18, [Artikel]

Weißgraeber, Philipp ; van der Wall, H. ; Khabbazeh, S. ; Kroker, Andreas Markus ; Becker, Wilfried (2012):
Effect of the lateral rotators on the load transfer in the human hip joint revealed by mechanical analysis.
In: Annals of Anatomy 194., S. 461-466, [Artikel]

2011

Dieringer, Rolf ; Becker, Wilfried (2011):
Application of the scaled boundary finite element method to plate bending problems.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 11., S. 203-204, [Artikel]

Dieringer, Rolf ; Becker, Wilfried ; Spiehl, Dieter ; Dörsam, Edgar (2011):
Experimental Analyses and Numerical Studies of Crack Formation in Functional Printed Structures.
In: LOPE-C 2011, Large-area Organic and Printed Electronics Convention, 28.-30. Juni 2011, Messe Frankfurt. CD-ROM, S.225-229., [Konferenzveröffentlichung]

Dieringer, Rolf ; Hebel, Jochen ; Becker, Wilfried (2011):
The scaled boundary finite element method for plate bending problems.
In: Proceedings of the 19th International Conference on Computer Methods in Mechanics, 9.-12. Mai 2011, Warschau. Hrsg.: A. Borkowski, T. Lewinski, G. Dzierzanowski. S. 169-170., [Konferenzveröffentlichung]

Fahlbusch, N.-C. ; Becker, Wilfried (2011):
Effective mechanical properties of closed-cell foams investigated with a microstructural model and numerical homogenisation.
In: Shell-like Structures — Nonclassical Theories and Applications, Series Advanced Structured Materials Vol. 15. Hrsg.: H. Altenbach und V. Eremeyev. Springer., S. 549-560, [Artikel]

Fahlbusch, N.-C. ; Becker, Wilfried ; Kolupaev, V. A. (2011):
Numerische Homogenisierung von harten Schäumen.
In: Tagungsband 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Hochschulcampus Merseburg, 29.6.- 1.7.2011. CD-ROM., [Konferenzveröffentlichung]

Kolupaev, V. A. ; Bleier, A. ; Becker, Wilfried (2011):
Anwendung der bimodalen Elastizitätstheorie auf den Schaumkern eines Sandwiches.
In: Tagungsband 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Hochschulcampus Merseburg, 29.6.-1.7.2011. CD-ROM., [Konferenzveröffentlichung]

Kratochvil, Jan ; Becker, Wilfried (2011):
Asymptotic analysis of the interaction of a finite number of holes in an elastic plane or half-plane.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 11., S. 237-238, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2011):
Laminattheorien höherer Ordnung – Schubdeformationstheorie 1. Ordnung.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-31., [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2011):
Laminattheorien höherer Ordnung – Schubdeformationstheorie 3. Ordnung und lagenweise Theorien.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-32., [Artikel]

Sator, Christian ; Becker, Wilfried (2011):
On stress singularities at plane bi- and trimaterial junctions – A way to derive some closed-form analytical solutions.
In: 11th International Conference on the Mechanical Behavior of Materials. 5.-9.6.2011, Lake Como, Milano. Proceedings, Procedia Engineering, Volume 10,, [Konferenzveröffentlichung]

Sator, Christian ; Becker, Wilfried (2011):
The orders of singular stresses at plane bi- and trimaterial junctions – Closed-form analytical solutions.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 11., S. 267-268, [Artikel]

Weißgraeber, Philipp ; Becker, Wilfried (2011):
Analysis of crack formation in bonded lap joints using finite fracture mechanics on the basis of linear elasticity olutions.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 11., S. 181-182, [Artikel]

Weißgraeber, Philipp ; Becker, Wilfried (2011):
A New Finite Fracture Mechanics Approach for Assessing the Strength of Bonded Lap Joints.
In: Key Engineering Materials Vols. 471-472., S. 1075-1080, [Artikel]

Weißgraeber, Philipp ; Becker, Wilfried (2011):
Predicting effective strengths of bonded lap joints with a finite fracture mechanics criterion.
In: Proceedings of the 32nd Riso International Symposium on Materials Science: Composite materials for structural performance: Towards higher limits. Editors: S. Faester, D. Juul Jensen, B. Ralph, B. F. Sorensen. Technical University of Denmark, S. 479-486., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2011):
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcements.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-34., [Artikel]

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2011):
On the determination of edge reinforcement properties for optimum lightweight design of composite stiffeners.
In: Shell-like Structures — Nonclassical Theories and Applications, Series Advanced Structured Materials Vol. 15. Hrsg.: H. Altenbach und V. Eremeyev. Springer., S. 507-516, [Artikel]

2010

Hebel, Jochen (2010):
Modellierung spröder Rissbildung an Spannungskonzentrationen mit der Bruchmechanik finiter Risse.
TU Darmstadt, FB Maschinenbau, [Online-Edition: urn:nbn:de:tuda-tuprints-23046],
[Dissertation]

Sator, Christian (2010):
Asymptotische Nahfeldanalysen ebener Multi-Materialverbindungsstellen mit der Methode komplexer Potentiale.
TU Darmstadt / Fachgebiet Strukturmechanik, [Online-Edition: urn:nbn:de:tuda-tuprints-22304],
[Dissertation]

Dieringer, Rolf ; Becker, Wilfried (2010):
Numerical Analysis of Crack Initiation at Stress Concentrations in Printed Transistors.
In: Proceedings of LOPE-C 2010, International Conference and Exhibition for the Organic and Printed Electronic Industry, 31.05.-02.06.2010, Frankfurt/M, CD-ROM., [Konferenzveröffentlichung]

Hebel, Jochen ; Dieringer, Rolf ; Becker, Wilfried (2010):
Modelling brittle failure initiation at geometrical and material discontinuities using a finite fracture mechanics approach.
In: Engineering Fracture Mechanics 77., S. 3558-3572, [Artikel]

Ivanova, J. ; Nikolova, G. ; Dineva, P. ; Becker, Wilfried (2010):
Interface behavior of a bi-material plate under dynamic loading.
In: Journal of Engineering Mechanics, ASCE, S. 1194-1201, [Artikel]

Kolupaev, V. A. ; Becker, Wilfried ; Wieser, J. ; Klein, R. (2010):
Fracture of fibre-reinforced foams with PU matrix.
In: Proceedings of the 14th International Scientific Conference on Polymeric Materials P.2010, 15.-17.09.2010, Halle (Saale). Hrsg.: H.-J. Radusch, L. Fiedler., [Konferenzveröffentlichung]

Kolupaev, V. A. ; Becker, Wilfried ; Wieser, J. (2010):
Mechanical properties of fibrereinforced hard foams.
In: 16th International Conference Mechanics of Composite Materials, 24.-28.05.2010, Riga, Book of Abstracts., [Konferenzveröffentlichung]

Kratochvil, Jan ; Becker, Wilfried (2010):
Structural analysis of composite bolted joints using the complex potential method.
In: Composite Structures 92,, S. 2512-2516, [Artikel]

Kratochvil, Jan ; Becker, Wilfried (2010):
A complex potential approach for the analysis of a bolt-laminate specimen with finite dimensions.
In: 16th International Conference Mechanics of Composite Materials, 24.-28.05.2010, Riga, Book of Abstracts., [Konferenzveröffentlichung]

Kroker, Andreas Markus ; Becker, Wilfried (2010):
A higher-order composite beam theory for closedform analysis of beams with box and I cross-section.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 10,, S. 179-180, [Artikel]

Mayland, Wibke ; Becker, Wilfried (2010):
Investigation of Stress Singularities due to Geometrical and Material Discontinuities in Piezoelectric Laminates by the Scaled Boundary Finite Element Method.
In: International Journal of Advances in Mechanics and Applications of Industrial Materials 1,, S. 11-17, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2010):
Lokales Beulen von Composite-Platten mit offenprofiligen Längssteifen – Platten unter Längsdruck.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-25., [Artikel]

Mittelstedt, C. ; Beerhorst, M. ; Becker, Wilfried (2010):
Buckling of omega-stringer-stiffened composite panels.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-29., [Artikel]

Mittelstedt, C. ; Erdmann, H. ; Becker, Wilfried ; Schröder, K. U. (2010):
Postbuckling of imperfect laminate plates under inplane shear — closed-form approximate solutions.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-27., [Artikel]

Sator, Christian ; Becker, Wilfried (2010):
On the search of supersingularities, more severe than common crack singularity.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 10,, S. 133-134, [Artikel]

Sator, Christian ; Becker, Wilfried (2010):
Stress Singularities at a Multi-Material-Junction.
In: Proceedings of the 18th European Conference on Fracture, 29.8.-3.9.2010, Dresden. CD-ROM., [Konferenzveröffentlichung]

Weißgraeber, Philipp ; Becker, Wilfried (2010):
Minimum Stiffness Criteria for Edge Reinforcements of Elastically Clamped Plates.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 10,, S. 225-226, [Artikel]

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2010):
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcement and elastic clamping.
In: Proceedings of the 14th European Conference on Composite Materials, 7.-10. Juni 2010, Budapest, Hungary, Paper ID: 829-ECCM14. CD-ROM., [Konferenzveröffentlichung]

Werner, S. ; Mittelstedt, C. ; Becker, Wilfried (2010):
Generic buckling curves for stiffened composite plates under inplane shear load.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-28., [Artikel]

2009

Becker, Wilfried ; Mittelstedt, C. (2009):
Laminat-Randeffekte.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-16., [Artikel]

Demiray, Serkan ; Becker, Wilfried ; Hohe, Jörg (2009):
Investigation of the fatigue behaviour of open-cell foams by a micromechanical 3-D model.
In: Materials Science and Engineering A 504,, S. 141-149, [Artikel]

Goswami, S. ; Becker, Wilfried (2009):
A Computational Approach to Enhance Structural Stability of Adaptive Piezoelectric Hybrid Stiffened Structural Components.
In: AES Technical Reviews – International Journal of Advances in Mechanics and Applications of Industrial Materials 1,, S. 41-50, [Artikel]

Haddad, Yehia ; Becker, Wilfried (2009):
On the Functional Characterization of a Class of Adaptive Composites with a Time-history Dependent Memory.
In: Advances and Trends in Engineering Materials and their Applications, Proceedings, AESATEMA’ 2009, Fourth International Conference, Hamburg, Germany, 1.-4. September 2009, S. 147-157. CD-ROM., [Konferenzveröffentlichung]

Hebel, Jochen ; Dieringer, Rolf ; Becker, Wilfried (2009):
Numerical analysis of brittle failure in notched structures by means of a finite fracture mechanics model.
In: Proceedings of the 12th International Conference on Fracture, 12.-17.7.2009, Ottawa, Beitrag T06.003, CD-ROM., [Konferenzveröffentlichung]

Kroker, Andreas Markus ; Becker, Wilfried (2009):
Closed-form analysis of a high-order composite box beam theory.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 9,, S. 213-214, [Artikel]

Kroker, Andreas Markus ; Becker, Wilfried (2009):
A Higher-Order Beam Theory for Composite Box Beams.
In: Proceedings of the 17th International Conference on Composite Materials ICCM-17, 27.-31.7.2009, Edinburgh, CD-ROM., [Konferenzveröffentlichung]

Mayland, Wibke ; Becker, Wilfried (2009):
Scaled boundary finite element analysis of stress singularities in piezoelectric multi-material systems.
In: PAMM — Proceedings in Applied Mathematics and Mechanics 9,, S. 99-102, [Artikel]

Mayland, Wibke ; Becker, Wilfried (2009):
Semi-analytical investigation of stress singularities due to geometrical and material discontinuities in piezoelectric laminates.
In: Advances and Trends in Engineering Materials and their Applications, Proceedings, AES-ATEMA’2009, Fourth International Conference, Hamburg, Germany, 1.-4. September 2009, S. 29-34. CD-ROM., [Konferenzveröffentlichung]

Mayland, Wibke ; Becker, Wilfried (2009):
Stress Singularities in Piezoelectric Multi-Material Systems.
In: Proceedings of the 17th International Conference on Composite Materials ICCM-17, 27.-31.7.2009, Edinburgh, CD-ROM., [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2009):
Beulen ausgesteifter Composite-Platten unter Druckbelastung.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-21., [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2009):
Beulen dreiseitig gelenkig gelagerter gedrückter orthotroper Platten mit Versteifung am freien Rand.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-22., [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2009):
Nachbeulverhalten imperfekter orthotroper Laminatplatten - Platten mit gelenkig gelagerten oder fest eingespannten unbelasteten Längsrändern unter Längsdruck.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-24., [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2009):
A semi-analytical discretization method for the near-field analysis of unsymmetrically laminated multimaterial junctions.
In: Composite Structures 91,, S. 403-411, [Artikel]

Mittelstedt, C. ; Beerhorst, M. ; Becker, Wilfried (2009):
Ein Beitrag zur Analyse des Flansch-Beulproblems dünnwandiger anisotroper Composite-Träger.
In: Bauingenieur 84,, S. 35-45, [Artikel]

2008

Becker, Wilfried ; Mittelstedt, C. (2008):
Effiziente Analyse interlaminarer Spannungen in thermomechanisch beanspruchten Composite-Laminaten.
In: Tagungsband Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23.-25.9.2008, CD-ROM., [Konferenzveröffentlichung]

Haddad, Yehia ; Becker, Wilfried (2008):
On the Stochastic Micromechanics of a Class of Adaptive Composite Systems.
In: Proceedings of AES-ATEMA’2008 International Conference on Advances and Trends in Engineering Materials and Their Applications. 1.-5.9.2008, Cesena, Italien, S. 77-81., [Konferenzveröffentlichung]

Hebel, Jochen ; Becker, Wilfried (2008):
Analysis of notches and cracks in laminated plates by means of scaled boundary finite elements.
In: XXII International Congress of Theoretical and Applied Mechanics, 25.-29. August 2008, Adelaide, CD-ROM Proceedings, Beitrag 11475., [Konferenzveröffentlichung]

Hebel, Jochen ; Becker, Wilfried (2008):
Analysis of thin unsymmetric laminated plates by means of the scaled boundary finite element method.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 10285-10286, 8, [Artikel]

Hebel, Jochen ; Becker, Wilfried (2008):
Modellierung von Sprödbruchinitiierung an Kerben und Fügungen.
In: Tagungsband Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23.-25.9.2008, CD-ROM., [Konferenzveröffentlichung]

Hebel, Jochen ; Becker, Wilfried (2008):
Numerical analysis of brittle crack initiation at stress concentrations in composites.
In: Mechanics of Advanced Materials and Structures 15., S. 410-420, [Artikel]

Hebel, Jochen ; Becker, Wilfried (2008):
Scaled Boundary Finite Element Formulations for Laminated Plates.
In: Proceedings of the 8th World Congress on Computational Mechanics, 30.6.-5.7.2008, Venice. Hrsg.: B. A. Schrefler und U. Perego, CD- ROM., [Konferenzveröffentlichung]

Hebel, Jochen ; Becker, Wilfried ; Leguillon, D. ; Yosibash, Z. (2008):
Failure analysis of brittle elastic notched structures utilising finite fracture mechanics procedures.
In: Proceedings of the 17th European Conference on Fracture, Brno, 2.-5.9.2008, CDROM, S. 718-725., [Konferenzveröffentlichung]

Hohe, Jörg ; Becker, Wilfried (2008):
Effektiveigenschaften von Sandwich-Wabenkernen.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 22600-01., [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2008):
Reddy’s Layerwise Laminate Plate Theory for the Computation of Elastic Fields in the Vicinity of Straight Free Laminate Edges.
In: Materials Science and Engineering – A 498., S. 76-80, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2008):
Flansch-Beulen dünnwandiger Composite-Träger.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau,, S. FL 33100-13, [Artikel]

Sator, C. ; Becker, Wilfried (2008):
Analyse interlaminarer Spannungskonzentrationen an gekrümmten Rändern von Laminatlöchern.
In: Tagungsband Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23.-25.9.2008, CD-ROM., [Konferenzveröffentlichung]

Wigger, Hubertus Michael ; Becker, Wilfried (2008):
Closed-Form Analysis of the Stress Field at Rectangular Corners of Reinforcement Patches.
In: Mechanics of Advanced Materials and Structures 15,, S. 104-116, [Artikel]

2007

Demiray, Serkan ; Becker, Wilfried ; Hohe, Jörg (2007):
Numerical determination of initial and subsequent yield surfaces of open-celled model foams.
In: International journal of solids and structures, S. 2093-2108, 44, [Artikel]

Hebel, Jochen ; Schmidt, Kay ; Zerres, Patrick ; Becker, Wilfried (2007):
Improved ski designs by means of mechanical simulation.
Ed. by Vesa Linnamo ... - Oxford [u.a.], Meyer & Meyer Sport, In: International Congress on Science and Nordic Skiing <2006, Vuokatti> : Science and nordic skiing : the International Congress on Science and Nordic Skiing was held at the Vuokatti Sports Institut ... from June 18 - 20 2006].- Ed. by Vesa Linnamo ... - Oxf, [Konferenzveröffentlichung]

Metz, Matthias ; Becker, Wilfried (2007):
A sport ski taylored to the individual skier by finite element method.
In: 4th International Congress on Science and Skiing, 14-20 Dec. 2007, St. Christoph am Arlberg : Book of abstracts.- Ed E. Müller ... S. 149, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2007):
Free-edge effects in composite laminates.
In: Applied mechanical reviews, S. 217-245, 60, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2007):
The Pipes-Pagano-Problem revisited : elastic fields in boundary layers of plane laminated specimens under combined thermomechanical load.
In: Composite structures, S. 373-395, 80, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2007):
A semi-analytical discretization method for the near-field analysis of two-dimensional multimaterial wedges under plane strain conditions.
In: CD-ROM proceedings of the Sixteenth International Conference on Composite Materials, July 8 - 13, 2007, Kyoto, Japan / Edited by.: Kazuro Kageyama ...- Kyoto, 2007.- 1 CD-ROM.- MoKM1-01, [Konferenzveröffentlichung]

Wigger, Hubertus Michael ; Becker, Wilfried (2007):
Analysis of anisotropic inplane corners.
In: Composites science and technology, S. 3078-3089, 67, [Artikel]

Wigger, Hubertus Michael ; Becker, Wilfried (2007):
Investigation of anisotropic reinforcement patch corners.
In: Composites / A, S. 1131-1140, 38, [Artikel]

Wigger, Hubertus Michael ; Becker, Wilfried (2007):
A variational finite layer technique for the investigation of reinforcement patch corners.
In: CD-ROM proceedings of the Sixteenth International Conference on Composite Materials, July 8 - 13, 2007, Kyoto, Japan / Edited by.: Kazuro Kageyama ...- Kyoto, 2007.- 1 CD-ROM.- MoKM1-02, [Konferenzveröffentlichung]

Wigger, H. ; Becker, Wilfried (2007):
Patch Size Effects on Anisotropic Reinforcement Corners.
In: Mechanics of Composite Materials, S. 211-224., 43, [Artikel]

2006

Artel, J. ; Becker, Wilfried (2006):
Analysis of free-edge effects by boundary finite element method.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, S. 205-206, 6, [Artikel]

Artel, J. ; Becker, Wilfried (2006):
Analysis of the free-edge effect in piezoelectric laminated platesby the scaled boundary finite-element method.
Kippen, Saxe-Coburg Publ., In: Innovation in computational structures technology / ed. by B.H.V. Topping .<8. 2006,Las Palamas>. - Kippen : Saxe-Coburg Publ., 2006, [Konferenzveröffentlichung]

Artel, J. ; Becker, Wilfried (2006):
Implementation of kinematic coupling equations within the scaled boundary finite element method.
5.8.2006, Bangkok, Hrsg., W. Kanok-Nukulchai, In: Proceedings of The Tenth East Asia-Pacific Conference on Structural Engineering and Construction, 3.- 5.8.2006, Bangkok, Hrsg.: W. Kanok-Nukulchai, S. Munasinghe, N. Anwar. S. 377-382, [Konferenzveröffentlichung]

Becker, Wilfried ; Hebel, Jochen (2006):
Mit Simulation zum schnelleren Sportski.
In: Thema Forschung TU Darmstadt, S. 74-77, [Artikel]

Becker, Wilfried ; Sator, C. ; Zerres, P. (2006):
Ermitlung der Kraftflussverteilung und der Lastübertragung an zweischnittigen Niet- und Bolzenverbindungen zwischen CFK-Laminaten.
In: DGLR-Jahrbuch 2006, DGLR-2006-091. CD-ROM, [Artikel]

Demiray, S. ; Becker, Wilfried ; Hohe, J. (2006):
Analysis of two- and three-dimensional hyperelastic model foams under complex loading conditions.
In: Mechanics of Materials, S. 985-1000, 38, [Artikel]

Demiray, Serkan ; Becker, Wilfried ; Hohe, Jörg (2006):
Analysis of hardening effects of open-celled model foams by numerical homogenization.
Kippen, Saxe-Coburg Publ., In: Innovation in computational structures technology / ed. by B.H.V. Topping . <8. 2006, Las Palmas>. - Kippen : Saxe-Coburg Publ., 2006, [Konferenzveröffentlichung]

Demiray, Serkan ; Becker, Wilfried ; Hohe, Jörg (2006):
Homogenisation of elasto-plastic open-celled foams.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, S. 473-474, 6, [Artikel]

Hansel, W. ; Becker, Wilfried (2006):
Gewichtsminimale Laminat-Leichtbaustrukturen mittels lagenweiser Topologieoptimierung.
Darmstadt, Techn. Univ. Darmstadt, In: LeichtBauen : TU Darmstadt, 16. + 17. März 2006 ; Tagungsband / Veranst.: Institut für Stahlbau und Werkstoffmechanik, TU Darmstadt; Stahl-Informations-Zentrum. Hrsg.: Jörg Lange. - Darmstadt : Techn. Univ. Darmstadt, Institut für Stahlbau und Werksto, [Konferenzveröffentlichung]

Hebel, Jochen ; Becker, Wilfried (2006):
Modelling crack initiation by means of finite fracture mechanics.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, S. 169-170, 6, [Artikel]

Hebel, Jochen ; Becker, Wilfried ; de Haart, L. G. ; Gubner, A. ; Steinbrech, R. W. (2006):
Integrity Assessment of Ceramic Sealing Joints.
Oberrohrdorf, Switzerland, European Fuel Cell Forum, In: Fuel cells for a sustainable world and 7th European Solid Oxide Fuel Cell Forum : two international fuel cell conferences with exhibition [at] Lucerne Fuel Cell Forum 2006, 3 - 7 July 2006, Kultur- und Kongresszentrum Luzern/Switzerland / European Fuel Ce, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2006):
Efficient Computation of order and mode of three-dimensional stress singularities in linear elasticity by the boundary finite element method.
In: International Journal of Solids and Structures, S. 2868-2903, 43, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2006):
Fast and reliable analysis of free-edge stress fields in a thermally loaded composite strip by a lagerwise laminate theory.
In: International Journal for Numerical Methods in Engineering, S. 747-770, 67, [Artikel]

Müller, A. ; Becker, Wilfried ; Stolten, D. ; Hohe, J. (2006):
A hybrid method to assess interface debonding by finite fracture mechanics.
In: Engineering Fracture mechanics, S. 994-1008, 73, [Artikel]

Müller, A. ; Goswami, S. ; Becker, Wilfried ; Stolten, D. ; de Haart, L. G. J. ; Steinbrech, R. W. (2006):
Assessment of the sealing joints within SOFC-stacks by numerical simulation.
In: Fuel Cells, S. 107-112, 06, [Artikel]

Wigger, Hubertus Michael ; Becker, Wilfried (2006):
Characterization of inplane loaded anisotropic interface corners with the boundary finite element method.
In: Computational Mechanics, S. 153-162, 37, [Artikel]

Wigger, Hubertus Michael ; Becker, Wilfried (2006):
Size effects a corners of anisotropic material discontinuities.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, S. 277-278, 6, [Artikel]

2005

Artel, Jens ; Becker, Wilfried (2005):
Coupled and uncoupled analyses of piezoelectric free-edge effect in laminated plates.
In: Composite Structures, S. 329-335, 69, [Artikel]

Becker, Wilfried ; Hebel, Jochen ; Engels, H. (2005):
Laminat-Pflaster-Verstärkungen und deren Optimierung aus strukturmechanischer Sicht.
In: Jahrbuch ... der Deutschen Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR)., S. 046, 2005, [Artikel]

Becker, Wilfried ; Hebel, Jochen ; Engels, Heiko (2005):
Elastomechanische Analyse und Optimierung von Laminat-Pflaster-Verstärkungen.
In: Faser-Kunststoff-Verbunde: Neue Freiheitsgrade in der Konstruktion, Darmstadt, 3. - 4. März 2005 ; 11. Nationales Symposium SAMPE Deutschland e.V. / Society for the Advancement of Material and Process Engineering; Technische Universität Darmstadt, Fachg, [Konferenzveröffentlichung]

Demiray, S. ; Becker, Wilfried ; Hohe, J. (2005):
Strain-energy based homogenisation of two- and three-dimensional hyperelastic solid foams.
In: Journal of Material Science, S. 5839-5844, 40, [Artikel]

Demiray, S. ; Becker, Wilfried ; Hohe, J. (2005):
A triangular finite element for sandwich plates accounting for transverse core compressibility.
Dordrecht, Springer, In: Sandwich structures 7: advancing with sandwich structures and materials ; proceedings of the 7th International Conference on Sandwich Structures, Aalborg University, Aalborg, Denmark, 29 - 31 August 2005 / ed. by O. T. Thomsen .... - Dordrecht : Springer,, [Konferenzveröffentlichung]

Demiray, S. ; Ohrndorf, A. ; Becker, Wilfried ; Hohe, J. ; Krupp, U. ; Christ, H.-J. (2005):
Micromechanical modeling and experimental characterization of the deformation behaviour of open-cell metal foams.
Uetikon-Zürich [u.a.], Trans Tech Publ., In: Cellular metals and polymers : CMaP ; proceedings of the Symposium on Cellular Metals and Polymers, sponsored by the Deutsche Forschungsgemeinschaft (DFG), held October 12 - 14, 2004, in Fürth, Germany, including reports from the DFG priority program, Ce, [Konferenzveröffentlichung]

Hebel, Jochen ; Becker, Wilfried ; Wenck, J. ; Müller, A. (2005):
Mechanical simulation of modern racing skis.
Erlangen, SCS Publ. House, In: Proceedings / 18. Symposium Simulationstechnique, ASIM 2005 : Erlangen, September 12 - 15, 2005 / [Friedrich-Alexander-Universität Erlangen-Nürnberg ...]. Ed. by Frank Hülsemann .... - Erlangen : SCS Publ. House, 2005 (Frontiers in simulation ; 15, Buc, [Konferenzveröffentlichung]

Hohe, J. ; Becker, Wilfried (2005):
A probabilistic approach to the numerical homogenization of irregular solid foams in the finite strain regime.
In: International Journal of Solids and Structures, S. 3549-3569, 42, [Artikel]

Longeru, M. ; Mittelstedt, C. ; Becker, Wilfried (2005):
The boundary finite element method for the efficient computation of orders and modes of three-dimensional stress singularities.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, S. 345-346, 5, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2005):
Asymptotic analysis of stress singularities in composite laminates by the boundary finite element method.
In: Composite Structures, S. 210-219, 71, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2005):
Asymptotical analysis of free-edge and free-corner effects in laminate structures.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, S. 251-252, 5, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2005):
Semi-analytical computation of 3D stress singularities in linear elasticity.
In: Communications in Numerical Methods in Engineering, S. 247-257, 21, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2005):
Thermoelastic fields in boundary layers of isotropic laminates.
In: Journal of Applied Mechanics, S. 86-101, 72, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2005):
The boundary finite element method for the identification of three-dimensinal stress singularities in linear fracture mechanics and laminate elasticity.
Oxford, Pergamon, In: Special issue on modelling, simulation and applied optimization : [... the First International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO-05) held at ... Sharjah ... from 1 to 3 February 2005] / guest ed. Ibrahim Sadek .... - Oxf, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2005):
The boundary finite element method for the semi-analytical computation of 3d stress singularities in fracture mechanics.
In: International Conference on Fracture <11, 2005, Turin>.- Abstract book and proceedings (CD-Rom), [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2005):
A layerwise displacement formulation for the analysis of 3d boundary layer effects in laminated plates.
Ed., A. Al Tamimi ... American University of Sharjah, In: Proceedings of the First International Conference on Composite Science and Technology ICCST/5. - Ed. : A. Al Tamimi ... American University of Sharjah, United Arab Emirates, 1.-3.2. 2005, S. 89-94, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2005):
A variational model for boundary layer effects in cross-ply laminates based on a C-0-continuous layerwise displacement formulation.
In: Journal of Composite Materials, S. 1789-1818, 39, [Artikel]

Müller, A. ; Hohe, J. ; Becker, Wilfried (2005):
On the evaluation of interfacial crack initiation by means of finite fracture mechanics.
In: International Conference on Fracture <11, 2005, Turin> . - Abstract Book and Proceedings, CD--ROM, [Konferenzveröffentlichung]

Wenck, J. ; Müller, A. ; Wigger, Hubertus Michael ; Hebel, Jochen ; Becker, Wilfried (2005):
Thermomechanical simulation of SOFC-stacks under service.
In: Fuel Cell Research Modelling and Experimental Validation <2, 2005, Stuttgart>. - Book of Abstracts und CD-Rom, [Konferenzveröffentlichung]

Wigger, H. ; Becker, Wilfried (2005):
Inplane stress singularities at the interface corner of a bimaterial junction.
In: Composite Structures, S. 193-199, 69, [Artikel]

Wigger, H. ; Becker, Wilfried (2005):
Interlaminar stresses at corners of laminate reinforcements.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, S. 453-454, 5, [Artikel]

2004

Artel, J. ; Becker, Wilfried (2004):
On the free-edge effect in piezoelectric laminated plates.
In: PAMM Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Demiray, S. ; Becker, Wilfried (2004):
Comparison of hyperelastic 2-D and 3-D model foams at large deformations.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Demiray, S. ; Becker, Wilfried ; Hohe, J. (2004):
A triangular v. Karman type finite element for sandwich plates with transversely compressible core.
In: Computer Methods in Applied Mechanics and Engineering, S. 2239-2260, 193, [Artikel]

Engels, Heiko ; Hebel, Jochen ; Becker, Wilfried (2004):
On the way to get optimized patch repairs of laminates.
Hrsg., J.Bravo Castiller ... (Applied mechanics in the Americas ; 10), In: Proceedings of the eighth Pan American Congress of Applied Mechanics PACAMVIII <8. 2004, LaHabana, Cuba>. - Hrsg.: J.Bravo Castiller ... (Applied mechanics in the Americas ; 10), S. 13-16, [Konferenzveröffentlichung]

Goswami, S. ; Mueller, A. ; Hohe, J. ; Becker, Wilfried (2004):
On the determination of crack initiation directions under mixed mode loading.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Hohe, J. ; Becker, Wilfried (2004):
On the effect of cell irregularity on the effective behaviour of solid foams.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Hohe, J. ; Becker, Wilfried (2004):
Probabilistic homogenization of hyperelastic solid foams.
In: ICTAM04 [International Congress of Theoretical and Applied Mechanics <21, 2004, Warschau>] : abstracts book and CD-Rom proceedings . - Hrsg. W. Gutkowski ; T. A. Kowalewski . - Warschau : IPPT PAN 2004, [Konferenzveröffentlichung]

Longeru, M. ; Mittelstedt, C. ; Becker, Wilfried (2004):
Thermal analysis of free-corner effects in cross-ply plates by a higher-order theory approach.
In: PAMM Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2004):
Interlaminar stress concentrations in layered structures: Part 1 : a selective literature survey on the free-edge effect since 1967.
In: Journal of Composite Materials, S. 1037-1062, 38, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2004):
Interlaminar stress concentrations in layered structures: Part 2 : closed-form analysis of stresses at laminated rectangular wedges with arbitrary non-orthotropic layup.
In: Journal of Composite Materials, S. 1063-1090, 38, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2004):
Three-dimensional analytical and semi-analytical investigations of free-corner effects.
In: ICTAM04 [International Congress of Theoretical and Applied Mechanics <21, 2004, Warschau>] : abstracts book and CD-ROM proceedings, - Hrsg.: W. Gutkowski ; T . A. Kowalewski.- Warschau : IPPT PAN 2004, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2004):
A hybrid variational model for the analysis of free-corner effects in layered plates.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2004):
A single-layer theory approach to stress concentration phenomena in layered plates.
In: Composites Science and Technology, S. 1737-1748, 64, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2004):
A variational finite layer technique for the investigation for the investigation of thermally induced stress concentrations in composite structures.
In: Journal of Thermal Stress, S. 953-981, 27, [Artikel]

Mittelstedt, C. ; Lindemann, J. ; Becker, Wilfried (2004):
A boundary finite element method formulation for stress concentrations problems in composite laminates.
In: Proceedings CD-ROM of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics <6, 2004 Beijing, China> / Zhenhan Yao (Hrsg.). - Beijing 2004, [Konferenzveröffentlichung]

Mueller, A. ; Becker, Wilfried (2004):
A spring system to ensure electrical contact within the SOFC-stack.
Hrsg., M. Mogensen. - Oberrohrdorf : European Fuel Cell Forum, In: Sixth European Solid Oxide Fuel Cell Forum, proceedings ; 2. - Hrsg.: M. Mogensen. - Oberrohrdorf : European Fuel Cell Forum, 2004, S. 813-819, [Konferenzveröffentlichung]

Mueller, A. ; Becker, Wilfried ; Wenck, W. ; Wigger, Hubertus Michael (2004):
On mechanical demands of a SOFC-stack under service.
Hrsg., M. Mogensen. Oberrohrdorf : European Fuel Cell Forum 2004, In: Sixth Europen Solid Oxide Fuel Cell Forum, proceedings ; 2. - Hrsg.: M. Mogensen. Oberrohrdorf : European Fuel Cell Forum 2004, S. 609-616, [Konferenzveröffentlichung]

Mueller, A. ; Goswami, S. ; Becker, Wilfried (2004):
Critical cracks in the vicinity of sealing joints?
In: Sixth European Solid Oxide Fuel Cell Forum, Proceedings ; 1.- Hrsg.: M. Mogensen .- Oberrohrdorf : Eureopean Cell Forum 2004. S. 339-352, [Konferenzveröffentlichung]

Mueller, A. ; Goswami, S. ; Becker, Wilfried (2004):
Detecting directions for crack nucleation at sealing joints of SOFC-stacks.
Hrsg., M. Mogensen .- Oberrohrdorf : Europen Fuel Cell Forum 2004, In: Sixth European Solid Oxide Fuel Cell Forum, proceedings ; 2. - Hrsg. : M. Mogensen .- Oberrohrdorf : Europen Fuel Cell Forum 2004, S. 1010-1019, [Konferenzveröffentlichung]

Mueller, A. ; Goswami, S. ; Hohe, J. ; Becker, Wilfried (2004):
On the assessment of cracks within the interface of thin layers on a substrate.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Mueller, A. ; Hohe, J. ; Becker, Wilfried (2004):
On crack assessment at bimaterial interfaces.
In: ICTAM04 [International Congress of Theoretical and Applied Mechanics <21, 2004, Warschau>] : abstracts book and CD-Rom proceedings. - Hrsg.: W. Gutkowski ; T. A. Kowalewski. - Warschau: IPPT PAN 2004, [Konferenzveröffentlichung]

Mueller, A. ; Wenck, J. ; Goswami, S. ; Lindemann, J. ; Hohe, J. ; Becker, Wilfried (2004):
The boundary finite element method for predicting directions of cracks emerging from notches at bimaterial junctions.
In: Engineering fracture mechanics, S. 373-386, 72, [Artikel]

Tapp, C. ; Hansel, W. ; Mittelstedt, C. ; Becker, Wilfried (2004):
Weight-minimization of sandwich structures by a heuristic topology optimization algorithm.
In: Computer Methods in Engineering Science, S. 563-574, 5, [Artikel]

Tapp, C. ; Hansel, W. ; Mittelstedt, C. ; Becker, Wilfried (2004):
Weight-reduced of sandwich structures by an efficient topology optimization technique.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Wigger, H. ; Becker, Wilfried (2004):
Implane stress singularities at the corner of an anisotropic material discontinuity.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Konferenzveröffentlichung]

Yang, Q.-S. ; Becker, Wilfried (2004):
Efffective stiffness and microscopic deformation of orthotropic plate containing arbitrary holes.
In: Computers and Structures, S. 169-180, 82, [Artikel]

Yang, Q.-S. ; Becker, Wilfried (2004):
Numerical investigation for stress, strain, and energy homogenization of orthotropic composite with periodic microstructure and non-symmetric inclusions.
In: Computational Materials Science, S. 169-180, 31, [Artikel]

2003

Artel, J. ; Becker, Wilfried ; Selinger, V. ; Stolten, D. ; Mergel, J. (2003):
Structural analysis and optimization of DMFC stack components.
Oberrohrdorf, European Fuel Cell Forum, In: Proceedings / 2nd European PEFC Forum : 30 June - 4 July 2003, Lucerne, Switzerland / ed. by Detlef Stolten ... Vol. 2 : Detlef Stolten ; Bernd Emonts European PEFC Forum <2, 2003, Luzern>.- Oberrohrdorf : European Fuel Cell Forum, [2003], S. 575-584, [Konferenzveröffentlichung]

Becker, Wilfried ; Hansel, W. (2003):
Gewichtsoptimierung von Laminat-Leichtbaustrukturen.
Siegen, Universität, In: 10 Jahre FOMAAS : Rückblick und Vorschau ; Festschrift zum Jubiläums-Kolloquium am 8. November 2002 / [Universität Siegen; FOMAAS, Analyse, Simulation & Optimierung Komplexer Systeme]. Hans Eschenauer; Wolfgang Wiechert (Hrsg.) Forschungszentrum für M, [Konferenzveröffentlichung]

Engels, H. ; Becker, Wilfried (2003):
Analysis and optimisation of patch repairs of laminates.
Ed., D. Bruno; G. Spadea, In: Composites of constructions : proceedings of the international conference composites in constructions <2003, Sept.16-19, Cosenza, Italy>. - Ed.: D. Bruno; G. Spadea, R.N. Swamy.- S.57-62, [Konferenzveröffentlichung]

Engels, H. ; Becker, Wilfried (2003):
Repair of laminates by external patches : analysis and optimisation.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 3, [Konferenzveröffentlichung]

Hohe, Joerg ; Becker, Wilfried (2003):
Effective mechanical behaviour of hyperelastic honeycombs and two-dimensional model : foams at finite strain.
In: Iinternational journal of mechanical sciences, S. 891-913, 45, [Artikel]

Hohe, Joerg ; Becker, Wilfried (2003):
Geometrically nonlinear homogenization analysis of hyperelastic solid foams.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 3, [Konferenzveröffentlichung]

Hohe, Jörg ; Becker, Wilfried (2003):
Effective stress analysis of elastomeric foams in the finite strain regime.
In: Proceedings of the International Conference on Applied Mechanics and Materials <2, 2003, 21.-23.1.03, Durban, Südafrika>, 2003, S. 297-302, [Konferenzveröffentlichung]

Hohe, Jörg ; Becker, Wilfried (2003):
Finite strain analysis of hyperelastic solid foams.
In: International Conference on the Mechanical Behaviour of Materials <9, 2003, Geneva, Switzerland> : Proceedings, CD-ROM, [Konferenzveröffentlichung]

Hohe, Jörg ; Goswami, S. ; Becker, Wilfried (2003):
Assessment of interface stress concentrations in layered composites with application to sandwich panels.
In: Computational Materials Science, S. 71-79, 26, [Artikel]

Lindemann, J. ; Becker, Wilfried (2003):
Analyse von Spannungslokalisierungen in Mehrschichtverbunden mittels der Rand-Finite-Elemente-Methode.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 2, [Konferenzveröffentlichung]

Lindemann, J. ; Becker, Wilfried (2003):
Interfacial stress concentrations near free edges and cracks by the boundary finite element method.
Amsterdam [u.a.], Elsevier, In: Fracture of polymers, composites, and adhesives II : this volume contains 47 peer-reviewed papers selected from those presented at the 3rd ESIS TC4 conference, "Fracture of polymers, composites and adhesives" held in Les Diablerets, Switzerland, 15 - 18th, [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2003):
Closed-form analysis of the free-corner effect in composite laminates.
In: Proceedings International Conference on Composite Science and Technology <4, 2003, Durban>. Ed. by Sarp Adali ...ICCST ; 4 (Durban) : 2003.01.21-23.- Durban, Südafrika, 2003, S. 199-204 [ISBN: 1-86840-502-8], [Konferenzveröffentlichung]

Mittelstedt, C. ; Becker, Wilfried (2003):
Free-corner effects in cross-ply laminates : an approximate higher-order theory solution.
In: Journal of Composite Materials, S. 2043-2068, 37, [Artikel]

Mittelstedt, C. ; Becker, Wilfried (2003):
Three-dimensional closed-form analysis of the stress field at rectangular corners of layered plates.
In: Archive of Applied Mechanics, S. 63-74, 73, [Artikel]

Mittelstedt, C. ; Hohe, Joerg ; Becker, Wilfried (2003):
Analysis of thermal stresses at free corners of layered plates.
In: International congress on thermal stresses and related topics <5, 2003, Blacksburg> : Proceedings, S.MA.9.1.1-Ma.).1.4, [Konferenzveröffentlichung]

Müller, A. ; Hohe, Joerg ; Becker, Wilfried ; Stolten, D. ; deHaart, L. G. J. ; Steinbrech, R. (2003):
Simulation and modelling : discovering the potential for structural optimization of fuel cell stacks.
Jülich, Forschungszentrum, In: Technical session: fuel cell systems of the World Renewable Energy Congress VII : proceedings / Forschungszentrum Jülich GmbH, Institut für Werkstoffe und Verfahren der Energietechnik. Detlef Stolten and Bernd Emonts (ed.).- Jülich : Forschungszentrum,, [Konferenzveröffentlichung]

Müller, Andreas ; Hohe, Joerg ; Goswami, J. ; Becker, Wilfried (2003):
Thermal effects on fracture initiation at bimaterial notches.
In: International congress on thermal stresses and related topics <5, 2003, Blacksburg> : Proceedings, S. MA.7.4.1-Ma.7.4.4., [Konferenzveröffentlichung]

Müller, Andreas ; Hohe, Jörg ; Becker, Wilfried (2003):
A closed-form analysis of material and geometry effects on stress singularities at unsymmetric bimaterial notches.
In: PAMM : Proceedings in Applied Mathematics and Materials, 2, [Konferenzveröffentlichung]

Zakharov, D. D. ; Becker, Wilfried (2003):
Rayleigh type bending waves in anisotropic media.
In: Journal of sound and vibration, S. 805-818, 261, [Artikel]

Altenbach, Holm ; Becker, Wilfried (2003):
Modern trends in composite laminates mechanics.
Springer, Wien New York, In: CISM Courses and lectures No. 448 - International Centre for mechanical sciences, ISBN 3-211-20302-8,
[Buch]

2002

Becker, Wilfried ; Gross, Dietmar (2002):
Mechanik elastischer Körper und Strukturen.
Berlin [u.a.], Springer-Verl., ISBN 3-540-43511-5,
[Buch]

Hasse, B. ; Marxen, J. C. ; Becker, Wilfried ; Ehrenberg, Helmut ; Epple, M. (2002):
A crystallographic study of the love dart (gypsobelum) of the land snail helix pomatia (l.).
In: Journal of molecular studies, S. 249-254, 68, [Artikel]

2000

Hasse, B. ; Ehrenberg, H. ; Marxen, J. ; Marxen, J. C. ; Becker, Wilfried ; Epple, M. (2000):
Calcium carbonate modifications of the mineralized shell of the freshwater snail Biomphalaria glabrata.
In: Chemistry: European journal, S. 3679-3685, 6, [Artikel]

1996

Becker, Wilfried ; Gross, ; Schönfeld, ; Gross, ; Schönfeld, (1996):
Closed-form analysis of the temperature-induced bending deformations of parabolic sandwich reflectors.
In: Zeitschrift für Flugwissenschaften und Weltraumforschung. 20 (1996), S. 194-198, [Artikel]

Diese Liste wurde am Mon Aug 19 02:04:41 2019 CEST generiert.